Aller au contenu
WikilyWIKILY
Tous les jeux22 wikis · choisissez votre jeu
WikiModèles de Construction

Changer de jeu

22 wikis · choisissez votre jeu
Parcourir les modèles

Décoratif

new Stargate

mhoTéléversé le 10 sept. 2026
  • 224Structures
  • 1Constructions
  • 68Téléchargements
  • 2J'aime
Template ID3049Guide de la console
J'aime: 2

Description

The new Stargate This places a vertical 24sided small-Wall Ring with two Tek Cellar Doors "inside it" (-16 offset) to mimic a "true 9 Chevron Stargate" ! It only took me around 11 Month to get this right again & into an easy instant-build Template, after Wildcard made all "inner-Arches" illegal over the last Year... this one just doesnt use inner Arches at all now & works - just place it low enough that the 2 lowest Pillars in the Ring are ontop/above ground (those 2 will build the entire circle for YOU!) you could place it higher, but then the Gate would start to float, wich looks weird tbh - remove all Thatch get rid of the Ramps & the Scaffolding will just peel off ... the 3 small Foundations just force the Pillars for the CellarDoors & Stairs into existence! - finish the Ring by placing the missing lowest side (Wall, 2 Ceilings & a PillarBeam) these are missing, so this can only build itself correctly! - add a small Stair "in the Back" and cover the Ring's "floor" with 6 small Ceilings [see Screen], so no1 can fall into it & get stuck. Now place the missing Stairs & 2 more down the other Side - Fill the outer Rim with small Pillar Beams (cant leave them in, because of the 40-Piece limit...) - the Triangles on the Sides are only there to cover-up the lower Parts of the CellarDoors, replace them if you want to, or find a better cover-up, they are of no consequence for the circle! Thats it! PS: if you really want to, i guess it could be possible to integrate this into a ceiling floor & have it look like the "round Stone Portal" on ceilings ... its a bit tricky, but the foundation in the front & the stairs in the back, could be used to have this "inside a base", but its not designed for it! [the foundation is just positioned below the cellar door,like on all my gates so far, so the ceilings from the stairs are just "half a wall higher" inside the circle] Enjoy an ancient Alteran Marvel of Engineering in YOUR Base!

Comment l'obtenir sur console

Guide complet pour console

Les joueurs sur console (PlayStation, Xbox) peuvent télécharger et placer ce modèle directement en jeu grâce au mod Template Hammer Importer.

  1. 1Installer le modOpen the in-game mod browser and search "Wikily" or "Template Hammer Importer".
  2. 2Fabriquer l'importateurLancez Solo + Mode créatif et fabriquez le Wikily Template Importer (1 fibre).
  3. 3Saisir l'ID du modèleUtilisez l'objet, saisissez l'ID de modèle 3049 et l'index de construction, puis placez-le.

Constructions1 file

  • 1

    new Stargate

    224 structures

    ID du modèle : 3049 · Bâtiment : 0

    Plus de mho

    Voir Tout
    Bases116

    round Stone Portal + slim version

    A round Stone Portal ...creative name , i know .... This places most sides of a 24sided small wall triangle circle, sunken into the ground to ...well, look fancy ;) >>> to my dismay i must admit, i didnt test this on official, because its such a simple build, BUT ofc official & its dumb "40 pieces in an area-rule" made this a "broken" template & since the game doesnt allow me to give you a fully done portal, i made a SLIM VERSION without pillars !<<< ...sry.... you can ofc snap this to existing foundations, but to get the best look, id say, place this by hand! & build your wall from there, otherwise you might have "holes & such" visible - to get the best result, place this low enough, so that the horizontal pillar-beams just barely dont touch the ground - if placed lower, some of the lowest walls/ceiling/pillars might not autobuild, but the scaffolding exist, so you will be able to build these "missing" pieces by hand, even if the hammer doesnt (the fully build one on the first screen does not use the lowest sides either btw! but, if wanted/placed high enough, you could) - remove all thatch - add the missing horizontal pillars on the ground & those on the outer small walls (if i leave those, the pillars in the circle are blocked for the hammer) [if you use the SLIM VERSION, you have to add all the pillar beams on the inner & outer rim, because wildcard has issues with more then 40+ pieces in an area...] feel free to choose if you want to have foundations in the pathway or not & you could also fill the circles floor itself with small foundations, by offsetting them with a small pillar by 1/4 (as you can see in the screenshot) hope YOU enjoy it

    • 422 Structures
    • 2 Constructions
    • 6 J'aime
    • Vanilla
    mhoStone Age26 août 2026
    Décoratif95

    Round 48 sided Ocean Platform Pool

    This places a 48 sided Wall-Ring (+16height offset) over any Ocean Platforms Pool - add a [north turned]Ceiling in the "bottom right corner" (leave the corner itself open) and snap this Template to that ceiling - platforms are basically a giant foundation, so when you place one infront of you, its "north turned"! - the 4 extra foundations place a pillar & beam each (offset by 8 height & 8 distance). these interconnect the ring & the platform on all 4 sides! after removing all thatch, feel free to use the circle however you like! its fully supported/connected to the platform after all! PS: the lonely pillar in the center , only exists as "grab point" for the template (ignore it)! enjoy

    • 355 Structures
    • 9 J'aime
    • Vanilla
    mhoStone Age16 août 2026
    Bases81

    The Twin-Repli Crafting Oval

    This places a small Foundation Oval +16 offset above a normal Floor and adds two half Circles of Dedi's [26], with the Twin-Replicators centered inside the Oval - You can snap this to any existing Foundation Grid, no matter the Height [up to ~3/4 of a wall high] As long as you have a 9x6 Hole in your Foundations & a "North-turned" snap-Point. - If its placed too low for the 90°Foundations, the 2 Failsafe Pillars will create the two 90° Ceilings! so no worries - The Foundations inside the Oval are only Suggestions [at the right height]. if you want to fill it "standalone", use the Triangles on the Outside, otherwise, just "cut" normal Ceilings trough the entire Oval's Foundations, as well as over the 90°ones. - to close this, fill the Dedi half Circles to "3-stacks", then close the Ovals walls & finish it with a rim of quarter Ceilings ontop & you have a standalone Crafting Oval! for the Dedi-Plate Version(wich goes up to 126 dedis): - make sure its placed 5 Steps High and i guarantee you, all will build Flawlessly! - if its too low, the Failsafe Pillars will kick in & build the 90° parts for you, but then you will have to pick up the Cellar-Doors, build Ceilings & Dedis in the Center & then replace the Cellar Doors, on the 90°Beams! (Dedis can not be placed after the Cellar-Doors!) enjoy

    • 200 Structures
    • 2 Constructions
    • 3 J'aime
    • Vanilla
    mhoStone Age8 août 2026
    Bases60

    The Tek Cube (5³ Behemoth Cellar Door)

    A 5³ thin Pillar Cube standing on its Corner at 54.7° (& 45° turned) filled with 6 Tek Behemoth Cellar Doors The lower Tip of the Cube is half a Wall above the normal Ceilings below & centered on the Circle this HAS TO be placed higher then a normal "double-clicked Foundation"! but can be glued to any existing build, thats higher then that! (+16 height from the Ceiling-stacker is already enough & i 100% swear, this wasnt on purpose, just a happy coincidence!) - It is possible to connect this to a normal Foundation, but it would loose the "floating option" ! So i decided to just have the Cube's small Foundation being half a Wall higher then the normal ones. Now, the off-angle Foundations are hidden below the normal ones & the Cube "hovers" (if we use a "Glass" Skin on its foundation) - The normal Triangle Circle is only there to cover the Cube's support, but is not connected, just related/aligned to have the Cube in the Circle's Center! - its also possible to turn this into a "Base" by poking a small wall inside through the foundation & fill the cube with (circle)plate/floors at whatever height you like! enjoy

    • 106 Structures
    • 1 J'aime
    • Vanilla
    mhoStone Age9 août 2026

    Modèles similaires

    Voir Tout
    Décoratif1k

    Big Dodo

    This time I'm sharing "Big Dodo"! If you like it, please feel free to use it! It's an exterior-only building, so there's nothing inside, but you can live in it by placing your favorite facilities and furniture. (*^▽^*) 今回は「Big Dodo」を共有するぞ! 気に入ってくださった方はぜひ使ってみてくだされ! 外装のみの建築なので内部には何もないが、お好みの施設や家具を置いて住むこともできるぞ(*^▽^*)

    • 1,3k Structures
    • 24 J'aime
    • Vanilla
    Décoratif803

    Ilha pirata

    Ovo de Daeodon

    • 961 Structures
    • 29 J'aime
    • Vanilla
    Décoratif782

    Etholdir Simple Big Frontier Water Tower

    Simple water tower to add to your western or frontier base to provide you with some nice decoration as well as plenty of water storage.

    • 177 Structures
    • 34 J'aime
    • Vanilla
    EtholdirCréateur à la uneTribe Chief26 juin 2025
    Décoratif705

    Red Dragon head turret

    A turret base in the shape of a red dragon's head. Placing it around your base will also function as decoration. The turret can be replaced with other objects, such as a heavy turret. By placing a Tesla coil, you can perform electric attacks like a lightning wyvern. The interior contains generators and lights, and much of it is made from stone structures. No skins are used. The number of parts used is 396. 赤いドラゴンの頭の形をしたタレット台座です。 拠点のまわりに配置すれば装飾としても機能します。 タレットはヘビータレットなどの他の物と置き換えて使うこともできます。 テスラコイルを置けばライトニングワイバーンかのような電撃攻撃をすることもできます。 内部には発電機やライトがあり、多くを石材の建築物で作っています。 スキンの使用はありません。 使っている部品の数は396個です。

    • 396 Structures
    • 15 J'aime
    • Vanilla
    Chargement de la discussion...